Content Comparison

...

RMVLNK ‘/QIBM/ProdData/OS400/Navigator/help/com.ibm.iseries.plugin.brm.help.doc.jar’

• Customer instances have been reported with STRMNTBRM failing due to a missing QA1A7RCY logical file not being created on the 7.4 upgrade.  These situations uncovered a BRMS install error when logical files with a library other than QBRM exist on the QA1ARCY file in library QBRM.  The BRMS install process will be fixed in the BRMS September 2020 PTFs to handle this situation. 

To avoid this initial upgrade problem with the QA1ARCY file, prior to the 7.4 upgrade BRMS recommends the following:

1. Analyze the output from the command DSPDBR FILE(QBRM/QA1ARCY)

2. Remove any QPZAxxxxxx or QPZRxxxxxx named dependent files using the DLTF command,

NOTE: The exact QPZxxxxxx or QPZRxxxxxx logical file name should be used, do not use the generic value QPZA* or QPZR* in the DLTF command.

This problem could happen with any incorrect logical files on BRMS files in library QBRM. To address similar file problems on an upgrade, if logical files are reported missing after the 7.4 upgrade BRMS recommends the following options:

...

1. Analyze the output from the command command DSPDBR for the failing file. Example using QA1ARCY DSPDBR FILE(QBRM/QA1ARCY)

2. Remove any dependent files listed that are not for library QBRM using the DLTF command.

NOTE: The exact logical file name should be used, do not use a generic value in the DLTF command.

Option 2 - DSLO (Coming in September 2020 PTFs)

...